R8C13-Ctrl V1.0

 

 

Basics

The R8C13-Ctrl is an experimental board for the R8C/13 controller from Renesas, similar to our famous AVR-Ctrl.

The Controllers R8C11, R8C12, R8C13 and other pincompatible controllers can be used in this board.

The PBC can be directly assembled with the controller (SMD). Also the Glyn (and Elektor) R8C-Module can be placed onto the board.
You don't need a special ISP-Interface, the chip can be programmed via the serial RS232 interface, without setting jumpers or manual resetting.
Renesas suplies a free compiler!


R8C
(Prototype with Glyn (Elektor) -R8C/13-Board mounted
and a potentiometer for test purpose )

 

The LCD is compatible to the Elektor-Sources Elektor: 01/2006.

All portpins are connected to solderpins .

Tips for assembling

If you don't yuse a GLYN-Board, you can place the Chip directly.
see the soldering tips here

 

Schematics and top placement

 

Schaltplan

Bestückung

See the Download-Area for details .

The R8C-Ctrl without LCD

 

R8C13

 

Features

  • R8C/13 R8/C11 or R8C/12 directly usable or use of the R8C/13 Glyn (Elektor) Board
  • Text-LC-Display ( 2x16 Characters) (connection to the Elektor board from 01/2006)
  • up to 5 keys as a keyboard
  • Infrared receiver can be placed on the board (SFH 506)

  • 1. serial Interface (RS232) (SUB-D and MAX232)(needed for programming the chip)
    Programming logic for M16C-Flasher integrated
  • 2. serial Interface (SUB-D and MAX232)
  • Driver-IC ULN2803 (e.g. for stepper motors or up to 8 relays)
  • LEDs
  • A/D-inputs on connectors
  • All Portpins on connectors accessable
  • Size of the PCB: ca. 1/2 Euro (80x100mm) - industriall manufactured incl. electrical test


disclaimer