Motor, Servo & more

SPECIAL SALE Early version of the MK3638 - same technical specifications . This motor does not have such high-quality bearings as the MK3638 and is...

This is a spare parts set for the MK3644. Video of changing bearings Delivery 1 bearing (small) 1 bearing (big) 1 motor shaft 2 snap rings 2 stud...

Cover plate for mounting a 3-hole Carbon propeller for MK3638 / MK3644 (new version) and compatible motors (eg. T-Motor) Note on the MK3638 / MK3644:...

Gold connector 3.5mm, 1 pair delivery 1 pair incl. shrink tube

MK Propeller mount for EPP0845 or EPP1245-Propellers Suitable for MK2832/35, Roxxy (2824-34, 2827-34, 2827-35) and compatible AXI motors This is...

MK Propeller mount for EPP1045-Propellers Suitable for MK2832/35, Roxxy (2824-34, 2827-34, 2827-35) and compatible AXI motors This is specifically...

MK propeller mount with flat 5mm hub (M5 winding) for our V2 motors with 4 holes. Suitable for MK3638 (V2) and MK3640 (V2) Powertransmission via...

MK propeller mount with 5mm hub (M5 winding) for our V2 motors with 4 holes. Suitable for MK3644 (V2) Delivery 1 propeller mount and additional...

MK propeller mount with 6mm hub (M6 winding) for our V2 motors with 4 holes. Suitable for MK3638 (V2) Delivery 1 propeller mount and additional...

With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter...

With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter...

With this adapter you can mount 2 motors in coaxial configuration to a rigger. delivery Adapter and screws for motor mounting. Links more...

With this adapter you can mount 2 motors in coaxial configuration to a rigger. delivery Adapter and screws for motor mounting. Links more...

Servo with 180° and extremly high resolution. As spare part for MK HiSight SLR1 or HighSight III Technical Data Dimensions: about 37x20x39mm ...