All Products1 VPE 2500pcs Mosfet IPD042P03L3P channel mosfet IPD042P03L3 G Scope of delivery 1 piece (2500pcs) ♦ Ready to ship today 299,00€ Buy Now... more infoincl. VAT, plus shipping 1 VPE 500 pcs ADXRS620BBGZ-RLMEMS gyroscopes (ADXRS620BBGZ-RL) Originalverpackt Scope of delivery 1 package (500pcs) ADXRS620BBGZ-RL 6.000,00€ Buy Now... more infoincl. VAT, plus shipping 100pcs Set GPS receiver IC u-blox LEA-6S + antenna100pcs set 100x uBlox GPS receiver IC LEA 6S + 100x GPS patch antenna (25 x 25mm) (wheel or cut-wheel) for SMD assembling or slef assembly Data sheet... ♦ Ready to ship today 349,00€ Buy Now... more infoincl. VAT, plus shipping 1VPE 3000 Stück PMR780SN,115Trans MOSFET N-CH 60V 0.55A 3-Pin SC-75 T/R originalverpackt Lieferumfang 1VPE 3000 Stück ♦ Ready to ship today 99,00€ Buy Now... more infoincl. VAT, plus shipping 2pol Molex cabel 7cm2pin. Cable for Flight-Ctrl 3.0 Length: approx 7 cm Scope of delivery 1 piece ♦ Ready to ship today Buy Now... more info 32 Bit Mikrocontroller STR911FAM46X6IC MCU 32BIT 1MB FLASH 80LQFP ARM9® STR9 Microcontroller IC 32-Bit 96MHz 1MB (1M x 8) FLASH Larger quantities available on request. ♦ SOLD OUT ! 11,84€ Sold Out... more infoincl. VAT, plus shipping 3pol Molex cabel 11cm3pin. Cable to connect BL-Ctrl 3.0 or video components Length: approx 11 cm Scope of delivery 1 piece ♦ Ready to ship today 2,50€ Buy Now... more infoincl. VAT, plus shipping 3pol Molex cabel 25cm3pin. Cable to connect BL Ctrl 3.0 or video components Length: approx 25 cm Scope of delivery 1 piece ♦ Ready to ship today 2,79€ Buy Now... more infoincl. VAT, plus shipping 4pol Molex cabel 25cm3pin. Cable to connect video components Length: approx 25 cm Scope of delivery 1 piece ♦ Ready to ship today 2,99€ Buy Now... more infoincl. VAT, plus shipping 4pol Molex cabel 8cm4pin. Cable for Flight-Ctrl 3.0 Length: approx 8 cm Scope of delivery 1 piece ♦ Ready to ship today 2,50€ Buy Now... more infoincl. VAT, plus shipping 5pol Molex cable 12cm5pin. Molex Cable Length: approx 120 mm Scope of delivery 1 piece ♦ Ready to ship today 3,09€ Buy Now... more infoincl. VAT, plus shipping 5pol Molex cable 30cm5pin. Molex Cable Length: approx 300 mm Scope of delivery 1 piece ♦ Ready to ship today 3,29€ Buy Now... more infoincl. VAT, plus shipping ACC Upgrade for FC2.1ACC Upgrade sensor for Flight-Ctrl 2.1 ME. With this small board a Flight-Ctrl V2.1 can be upgraded to V2.2 for the installation on the FlightCtrl... ♦ Ready to ship today 7,90€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profi Alu-Rigger (small) 175/1.0mm BLACKThis is the small anodized Aluminium rigger for OKTO frames. (not for Okto2!) Technical Data for motor mounting hole distance: 19mm Dimensions... ♦ Ready to ship today 3,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK-Hexa XL Rigger 355/1.5mm BLACKThis is an anodized Aluminium rigger as a spare part for the short rigger from Okto XL frame. stronger material 1.5mm Technical Data for motor... ♦ Ready to ship today 15,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile Alu-Rigger 290/1.0mm BLUEThis is an anodized Aluminium rigger MikroKopter frames It is used for: MK Hexa-Frame Okto2-Frame (the short rigger) Quadro-XL-Frame Technical Data ... ♦ Ready to ship today Buy Now... more info Aluminum square profile Alu-Rigger 290/1.0mm REDThis is an anodized Aluminium rigger MikroKopter frames It is used for: MK Hexa-Frame Okto2-Frame (the short rigger) Quadro-XL-Frame Technical Data ... ♦ Ready to ship today Buy Now... more info Aluminum square profile Alu-Rigger (small) 175/1.0mm REDThis is the small anodized Aluminium rigger for OKTO frame. (not for Okto2!) Technical Data for motor mounting hole distance: 19mm Dimensions... ♦ Ready to ship today 3,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile Alu-Rigger 290/1.0mm BLACKThis is an anodized Aluminium rigger for MK Hexa-frame or as a spare part for the short one of Okto2 frame. It is used for: MK Hexa-Frame Okto2-Frame... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK Rigger 545/1.5mm BLACKThis is an anodized Aluminium rigger. Technical Data for motor mounting hole distance: 19mm Dimensions (LxWxH): ca. 545x10x10 mm Thinkness:... ♦ Ready to ship today 18,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK Rigger 545/1.5mm REDThis is an anodized Aluminium rigger. Technical Data for motor mounting hole distance: 19mm Dimensions (LxWxH): ca. 545x10x10 mm Thinkness:... ♦ Ready to ship today 18,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK-Hexa XL rigger 355/1.0mm REDThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK-Hexa XL Rigger 355/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK-Hexa XL rigger 355/1.0mm BLUEThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. This is an anodized Aluminium rigger as a spare part for the... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK-Okto XL rigger 460/1.0mm BLUEThis is an anodized Aluminium rigger as a spare part for the rigger from Okto XL frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK-Okto XL Rigger 460/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK-Okto XL Rigger 460/1.5mm BLACKThis is an anodized Aluminium rigger as a spare part for the rigger from Hexa XL frame. Stronger material: 1.5mm Technical Data for motor mounting... ♦ Ready to ship today 17,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK-Okto XL rigger 460/1.5mm REDThis is an anodized Aluminium rigger as a spare part for the rigger from Okto XL frame. The material is stronger: 1.5mm Technical Data for motor... ♦ Ready to ship today 17,95€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK30-Alu-Rigger 175/1.0mm BLACKThis is an anodized Aluminium rigger for small MK30 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK30-Alu-Rigger 175/1.0mm REDThis is an anodized Aluminium rigger for small MK30 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today 3,99€ Buy Now... more infoincl. VAT, plus shipping Aluminum square profile MK40-Alu-Rigger 215/1.0mm BLACKThis is an anodized Aluminium rigger for medium MK40 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK50-Alu-Ausleger 245/1.0mm SCHWARZDies ist ein eloxierter Aluausleger für einen Standard-MK50-Rahmen. Der Lochabstand zur Motorbefestigung beträgt 19mm und ist damit passend für Roxxy... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK50-Alu-Rigger 245/1.0mm REDThis is an anodized Aluminium rigger for MK50 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and E-Sky... ♦ Ready to ship today Buy Now... more info Aluminum square profile MK50-Alu-Rigger 245/1.0mm BLUEThis is an anodized Aluminium rigger for MK50 frames. The hole distance on the motor mount is 19mm and is therefore suitable for Roxxy and E-Sky... ♦ Ready to ship today Buy Now... more info Aluminum square profile Okto2-Alu-Rigger (long) 390/1.0mm BLACKThis is an anodized Aluminium rigger as a spare part for the long rigger from Okto2 frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today Buy Now... more info Aluminum square profile Okto2-Alu-Rigger (long) 390/1.0mm REDThis is an anodized Aluminium rigger as a spare part for the long rigger from Okto2 frame. Technical Data for motor mounting hole distance: 19mm ... ♦ Ready to ship today Buy Now... more info APC SlowFly Prop 10x3.8 SFAPC Propeller (right) Delivery 1 piece ♦ Ready to ship today Buy Now... more info APC SlowFly Prop 10x3.8 SFPAPC Propeller (left) Delivery 1 piece ♦ Ready to ship today Buy Now... more info APC SlowFly Prop 12x3.8 SFPAPC Propeller (left) Delivery 1 piece ♦ Ready to ship today Buy Now... more info APC SlowFly Prop 13x4.7 SFPAPC Propeller (left) Delivery 1 piece ♦ Ready to ship today Buy Now... more info APC SlowFly Prop 14x4.7 SFPAPC Propeller (left) Delivery 1 piece ♦ Ready to ship today Buy Now... more info APC Thin Electric Prop 13x6.5 EPAPC Propeller (left) Delivery 1 piece ♦ Ready to ship today Buy Now... more info ASSMANN WSW AWP IDC-Steckverbinder, 10-pol mit ZugenlastungASSMANN WSW AWP IDC-Steckverbinder, 10-pol mit Zugenlastung Pfostensteckverbinder Rastermaß RM 2.54 Herstellernummer: AWP-10-7210-T Auch grössere... ♦ Ready to ship today Buy Now... more info ASSMANN WSW AWP IDC-Steckverbinder, 6-pol mit ZugenlastungASSMANN WSW AWP IDC-Steckverbinder, 6-pol mit Zugenlastung Pfostensteckverbinder Rastermaß RM 2.54 Herstellernummer: AWP-06-7210-T Auch grössere... ♦ Ready to ship today Buy Now... more info AVR-Ctrl (bare pcb)Diese Leiterkarte ist als Einsteigerplatine gedacht. Sie ist bewusst zum Experimentieren ausgelegt, d.h. es besteht ist Möglichkeit viele... ♦ Ready to ship today 16,95€ Buy Now... more infoincl. VAT, plus shipping BEC Kabel 2pol. Buchse2 pin BEC-Cable for excample to connect the 5.8GHz Transmitter. (approx. 25cm) Delivery 1 Piece ♦ Ready to ship today 2,48€ Buy Now... more infoincl. VAT, plus shipping BL-Ctrl V1.2 (SMD preassembled)Brushless motor controller with fast response for the MikroKopter This it is a SMD-preassembled BL-Ctrl-kit, only one Capacitor has to be... ♦ Ready to ship today Buy Now... more info BL-Ctrl V2.0Brushless motor controller with fast response for the MikroKopter This it is a SMD-preassembled BL-Ctrl-kit, only the capacitors have to be... ♦ Ready to ship today Buy Now... more info Black coverNEW DESIGN - Transparent cover for use in MikroKopter (Okto or Hexa). Technical Data diameter: approx 185mm Height: approx 90mm color: black ... ♦ Ready to ship today Buy Now... more info BuzzerBuzzer (spare part for FlightCtrl) Scope of delivery 1 piece ♦ Ready to ship today 3,49€ Buy Now... more infoincl. VAT, plus shipping Buzzer Adapter PCBThis tiny bare pcb can be used to solder the buzzer or extend the servo cable for the camera mount. Scope of delivery 1 bare pcb Links article in... ♦ Ready to ship today 1,69€ Buy Now... more infoincl. VAT, plus shipping Cable set NaviCtrlCable set to connect the NaviCtrl to the FlightCtrl. Delivery 1x cable (ca. 3 cm) with two connectors (6-pin) 1x cable (ca. 3 cm) with two connectors... ♦ Ready to ship today 0,99€ Buy Now... more infoincl. VAT, plus shipping Cable set redundancy for 2 FlightCtrlCableset for using a 2nd FlightCtrl for redundancy. 1x Y- adapter für RC receiver 3x Molexcable 3pol (11cm) Links more information about... ♦ SOLD OUT ! 9,90€ Sold Out... more infoincl. VAT, plus shipping CamCtrl LANC / Servo (90° left)The CamCtrl is a control board to control cameras or video-cameras via the SONY LANC-Interface. For example: SONY HDR CX410, HDR-PJ650, HDR-PJ780... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping CamCtrl LANC / Servo (90° right)The CamCtrl is a control board to control cameras or video-cameras via the SONY LANC-Interface. For example: SONY HDR CX410, HDR-PJ650, HDR-PJ780... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping CamCtrl LANC / Servo (camera remote control)The CamCtrl is a control board to control cameras or video-cameras via the SONY LANC-Interface. For example: SONY HDR CX410, HDR-PJ650, HDR-PJ780 The... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping CamCtrl Multi / Servo (90° left)The CamCtrl is a control board to control cameras or video-cameras via the new SONY Multi-Interface (this is not LANC!). All cameras and camcorders... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping CamCtrl Multi / Servo (90° right)The CamCtrl is a control board to control cameras or video-cameras via the new SONY Multi-Interface (this is not LANC!). All cameras and camcorders... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping CamCtrl Multi / Servo (camera remote control)The CamCtrl is a control board to control cameras or video-cameras via the new SONY Multi-Interface (this is not LANC!). All cameras and camcorders... ♦ Ready to ship today 99,95€ Buy Now... more infoincl. VAT, plus shipping Cap for GPS-cover 64This is an alternate cover for the "GPS-cover 64" (if one does not use MKGPS) The dimensions correspond to the MKGPS board. The bottom conductors are... ♦ Ready to ship today 0,49€ Buy Now... more infoincl. VAT, plus shipping Carbon propeller cover (3-hole)Cover plate for mounting a 3-hole Carbon propeller for MK3638 / MK3644 (new version) and compatible motors (eg. T-Motor) Note on the MK3638 / MK3644:... ♦ Ready to ship today 3,99€ Buy Now... more infoincl. VAT, plus shipping Charging cable for MX16s/DX7Charger for JR-transmitters (eg MX16s, DX7 and compatible) ♦ Ready to ship today 1,60€ Buy Now... more infoincl. VAT, plus shipping Cinch Splitter1 to 2 Cinch Splitter ♦ Ready to ship today 1,95€ Buy Now... more infoincl. VAT, plus shipping Cinch-Molex adapterCinch to 3pin Molex Apdater for simple connection of a video-source to the 5.8GHz Video transmitters. Technical data Lenght: approx. 12cm Weight:... ♦ Ready to ship today 9,95€ Buy Now... more infoincl. VAT, plus shipping Circular level 10mmCircular level Technical Data Green fluorescent fluid on white background. Diameter: 10mm Height: 6.3mm ♦ Ready to ship today 2,70€ Buy Now... more infoincl. VAT, plus shipping Clip Nano StingerMounting clip for a Nano Stinger video transmitter to a SLR 1/2 camera mount delivery 1 piece ♦ Ready to ship today 2,49€ Buy Now... more infoincl. VAT, plus shipping Combi Centerplate (Carbon)This Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frame You will need two... ♦ Ready to ship today Buy Now... more info Combi Centerplate (GFK)This Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frame You will need two... ♦ Ready to ship today Buy Now... more info Compass 20mmMiniature magnetic compass The Compass has a fully encapsulated plastic case. Diameter: 20 mm Height 8 mm ♦ Ready to ship today 1,95€ Buy Now... more infoincl. VAT, plus shipping DC/DC - regulator R-785.0-1.0 SIP3This is a DC/DC-converter with 5V output voltage It can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is... ♦ Ready to ship today Buy Now... more info DC/DC - regulator TSR1-24120 SIP3 (12V)This is a DC/DC-converter with 12V output voltage Attention: not for the use on the FlightControl board - there a 5V type is used! Technical data... ♦ Ready to ship today Buy Now... more info DC/DC - regulator TSR1-2450 SIP3 (5V)This is a DC/DC-converter with 5V output voltage It can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is... ♦ Ready to ship today 7,95€ Buy Now... more infoincl. VAT, plus shipping DC/DC - regulator TSR1-2490 SIP3 (9V)DC/DC-converter with 9V output voltage There is no heatsink is necessary. Technical data according to the manufacturer Output voltage: 9 V / DC ... ♦ Ready to ship today Buy Now... more info DEANS charging cableCharging cable to connect the charging device (Ultramat 14 or 8) and the Lipo ♦ Ready to ship today Buy Now... more info DEANS comp. Ultra Plug (plug )High current connector Up to 50 - 70A possible DEANS compatible. scope of delivery 1 male connector ♦ Ready to ship today Buy Now... more info |
Die hier im Shop angebotenen Produkte sind Modellbau-Artikel bzw. Zubehör zum Modellbau und kein Spielzeug im Sinne der Spielzeugrichtlinie 2009/48/EG.
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !
Die Artikel sind für Kinder unter 14 Jahren nicht geeignet. Keine Abgabe an Personen unter 14 Jahren !